Skip to main content
Haydar  Aygün

Dr Haydar Aygün

Senior Lecturer

School of Media Arts and Technology

023 8201 6451 ext. 6451 Room no. RM427

Biography

Dr Aygün is a senior lecturer in acoustics. He is also course leader for MSc Applied Acoustics and admissions tutor for acoustics and media technology courses.

Dr Aygün joined Solent University in September 2012 from the University of Hull. He has a PhD in acoustics and vibration and a MSc in advanced materials, process and manufacturing from the University of Hull, and a BSc in mechanical engineering. Dr Aygün was involved in developing Solent's MSc Applied Acoustics, BEng and MEng Audio and Acoustic Engineering, and BEng Acoustics. 

Dr Aygün is a fellow of the Higher Education Academy, a member of the Institute of Acoustics, a member of the Acoustical Society of America, and a member of the Turkish Acoustical Society. He is a reviewer for the Journal of Applied Acoustics, and Journal of the Acoustical Society of America. He has also supervised undergraduate and postgraduate students and is currently supervising a research assistant investigating structural borne sound waves propagating through bones.

Further information

  1. Teaching experience

    Dr Aygün teaches a number of units our our acoustics degree programmes. Follow the link below to find out more.

    Dr Aygün teaches units including principals of acoustics, control of sound and vibration, fundamentals of signal processing, research methods, noise and vibration control, building acoustics, noise vibration and health, computer aided simulation, engineering mathematics, transducers and instrumentations, engineering physics, and acoustic materials. 

  2. Research interests

    Dr Aygün's research interests lie in a number of areas within acoustics. Follow the link below to find out more.

    Dr Aygün's research interest is in the design and development of devices, CFD (computational fluid dynamics) simulation of waves, duct acoustics, characterising acoustic materials, room acoustics, lung sounds, and acoustic/ultrasonic wave propagation.

    • Theory of vibration, and vibration control
    • Characterising acoustic materials
    • Transducers and measurements
    • Acoustic/ultrasonic wave propagation
    • CFD (computational fluid dynamics) simulation of waves
    • Finite element analysis
    • Design and development of devices
    • Lung sounds
    • Duct acoustics
    • Room acoustics
    • Environmental noise simulation
    His best four journal articles was submitted for the REF 2014 by Southampton Solent University. 
  3. Recent publications

    Haydar's recent publications include academic journal articles. For a list of these journal articles, follow the link below...
    1. Haydar Aygün, 2016, “Investigation of acoustics performance of compressed wool carpets” In proceedings of 23rd International Congress on Sound and Vibration, Athens, Greece, 10-14 July 2016. 
    2. H Aygün, C Barlow, S. Y. Liu, and L Yule, 2015, “Sound propagation through bone tissue” In proceedings of Institute of Acoustics, ACOUSTICS 2015, 15 October, Harrogate International Centre, UK), Vol. 37. Page 234-8.

    3. Haydar Aygün and Christopher Barlow, 2015 “Ultrasonic wave propagation in porous rigid ceramics at oblique incidence”, Applied Acoustics. Vol.88, 6-11.  

    4. Aygün, H. (2014) A Review of the State of Art in Applying Biot Theory to Acoustic Propagation through the Bone. Open Access Library Journal, 1: e994. http://dx.doi.org/10.4236/oalib.1100994.

    5. Haydar Aygün and Philip A. Rubini, 2014, “Behaviour of acoustic waves in a duct with Helmholtz resonator in presence of a temperature gradient” In proceedings of Institute of Acoustics (40th Anniversary Conference, 15-16 October 2014, NEC, Birmingham, UK).

    6. Haydar Aygün and Christopher Barlow, 2014, “Behaviour of ultrasonic waves in rigid porous materials: An anisotropic Biot-Attenborough model”Proceedings of Institute of Physics (Anglo-French Physical Acoustic Conference, AFPAC, 15 – 17 January 2014, Surrey, UK).  

    7. Haydar Aygün, Keith Attenborough, Walter Lauriks, Philip A. Rubini, and Christian M. Langton, 2011, “Wave propagation in Stereo-lithographical (STL) bone replicas at oblique incidence.” Applied Acoustics, Vol. 72 (7), 458-463. (Impact factor: 1.05), (The Leverhulme Trust).

    8. Haydar Aygün, Keith Attenborough, Walter Lauriks, Christian M. Langton, 2010, “Ultrasonic wave propagation in Stereolithographical bone replicas.”  J. Acoust. Soc. Am., 127 (6), 3781-3789 (2010). (Impact factor: 1.55), (The Leverhulme Trust).

    9. Haydar Aygün, Keith Attenborough, Michiel Postema, Walter Lauriks, Christian M. Langton, 2009, “Predicted angle-dependent tortuosity and elasticity effects on sound propagation in cancellous bone,” J. Acoust. Soc. Am. 126 (6), 3286-3290. (Impact factor: 1.55), (The Leverhulme Trust).

    10. Keith Attenborough and Haydar Aygün, 2009 “Empirical angle-dependent tortuosity functions and sound transmission through cancellous bone,” J. Acoust. Soc. Am. 125 (4), 2650-2650. (Impact factor: 1.55).

    11. Haydar Aygün, and Keith Attenborough, 2008, “Sound absorption by clamped poroelastic plates,” J. Acoust. Soc. Am. 124 (3), 1-7. (Impact factor: 1.55), (EPSRC).

    12. Haydar Aygün, and Keith Attenborough, 2008, “The insertion loss of perforated porous plates in a duct with and without mean air flow,” Applied Acoustics, Vol.69, 506-513. (Impact factor: 1.05), (EPSRC).

    13. Haydar Aygün, and Keith Attenborough , 2008, “Insertion loss of clamped perforated and non-perforated poroelastic plate silencers with flow,” Acta Acustica united with Acustica, Vol. 94, Number 5,  pp. 703-708(6).(Impact factor: 0.637), (EPSRC).

    14. Haydar Aygün, and Keith Attenborough, 2008, “Insertion loss of poro-elastic plates separated from a duct wall by an air cavity,” Proceedings of Institute of Acoustics, spring conference, University of Reading.

    15. Keith Attenborough, and Haydar Aygün, 2007, “Acoustical performance of clamped and perforated poro-elastic plates,” 19th International congress on acoustics, Madrid.

    16. Keith Attenborough, and Haydar Aygün, 2007, “Predictions and measurements of the acoustical properties of clamped and perforated poro-elastic plates in a duct,” Inter-Noise, Istanbul.

    17. Haydar Aygün, Keith Attenborough, and Alan Cummings, 2007, "Predicted effects of fluid loading on the vibration of elastic porous plates," Acta Acustica united with Acustica, Vol. 93, 284-289. (Impact factor: 0.637), (EPSRC).

    18. Keith Attenborough, and Haydar Aygün, 2006, “Vibro-acoustic responses of poro-elastic plates made from recycled materials,” Euro-Noise, Finland.

    19. Aygün H., Attenborough K., and Leclaire P., 2004, “Effects of fluid loading on elastic porous plate vibration,” Inter-Noise, Prague.